Frontline Heavy Duty Gate Lock (FA50)
The FA50 is a semi-automatic heavy duty Gate Lock. The lock works on the principle of a shoot / drop bolt securing the leading gate leaf to a steel ground plate via a steel locking pin.
The trailing leaf is secured to the leading leaf with a heavy-duty external magnetic lock. The system can be supplied with either battery back up for additional security or fail safe that will release the gates in the event of power failure to allow access by users/residents. The FA50 is suitable for numerous applications, including high security, residential and commercial sites.
Intercom Systems
GSM Door Entry System
GSM Door Entry System employing mobile phone technology to communicate and operate doors and automatic gates. Based on the 4000 Series door entry panel design, the GSM amplifier is totally self contained and only requires an external power supply and antenna while having the flexibility to combine with the full range of the 4000 series module features. |
 |
 |
Up to 10 call buttons.
|
|
Dials any landline or mobile number.
|
|
Divert a call to a second number when first is busy or not answered.
|
|
Dry contact relay output.
|
|
Auxillary output (Open collector).
|
|
Push to exit and auxillary inputs.
|
|
Programmable via SMS or dial in.
|
|
Access control feature for up to 250 ssers (SIM card dependant).
|
|
Check the signal strength via SMS. |
|
Programming menu protected by programmable 4 digit code.
|
|
Automatic call facility to retain the network connection if the system
is not used for long periods of time. |
 |
The GSM Door Entry System retains all the facilities of the 4000 Series which can include multiple doors, coded access, proximity access and bioaccess features. Available from a one button kit to a ten button system, they can all have up to 250 built in access codes dependent upon the SIM card used. This allows a user or users to call the entry panel and activate the lock output relay at no charge to the caller. Each button on the door panel can be programmed with two telephone numbers, allowing the system to divert a call if the first number is busy or not answered.
|
Push to exit and auxiliary inputs / outputs along with a dry contact timed lock output relay are standard. Programming the unit is carried out using either SMS text messaging or by dialling into the unit and using a telephone keypad. Programming options include the facility to program the telephone number, program the divert number, lock relay time, call time, microphone and speaker volume as well as many other security features.
|
 |
4K1S/GSM |
1 Button surface kit |
4K1/GSM |
1 Button flush kit |
4K2S/GSM |
2 Button surface kit |
4K2/GSM |
2 Button flush kit |
4K1S/GSM/CL |
1 Button surface kit c/w codelock |
4K1/GSM/CL |
1 Button flush kit c/w codelock |
4K2S/GSM/CL |
2 Button surface kit c/w codelock |
4K2/GSM/CL |
2 Button flush kit c/w codelock |
Art.4810-0 |
4000 Series GSM module (0 button) |
Art.4810-1 |
4000 Series GSM module (1 button) |
Art.4810-2 |
4000 Series GSM module (2 buttons) |
|
|
12-24V AC/DC power requirements
3A 24Vdc/120VAC changeover relay output
Programming:
|
Relay time (00-99 seconds)
Auxiliary out time (00-99 seconds)
Call time (20 seconds – 30 minutes)
Divert time (1 – 99 seconds)
Programming code (Any 4 digit code)
Divert (Any or all buttons)
Mic volume (10 settings)
Speaker volume (10 settings + 2 jumper options)
Auto Call (1 – 99 days)
|
Vandal Resistant Audio Panel
ONE WAY AUDIO KIT
The kit consists of a wall mountable white ABS plastic telephone with door
open facility, a boxed transformer (13V AC) and a flush 12 gauge stainless
steel door panel
|
Door panel dimensions are :- 125mm(W) x 225mm(H) |
|
Back box dimensions are :- 105mm(W) x 205mm(H) x 50mm(D) |
TelGuard Intercom Systems
TelGuard’s range of intercom entry systems provides superb access with minimum disruption for installation. The system works by visitors pressing the intercom at the gate, the panel dials the appointed house telephone number to allow residents to answer using any phone connected to that line. TelGuard is able to operate with cordless and mobile telephones so an entrance could be controlled while on the move.
On answering the call a tone is heard on the telephone handset to indicate the call is from the TelGuard. If access is to be permitted to the caller, a number is keyed into the telephone handset and will trigger a relay to open the gate. A tone will be heard on the phone to indicate operation of the command to open the door/gate/barrier.
An independent phone point (installed by your telephone service provider) is required at the gate; this will have an independent number.
Junior Range
The Junior has a keypad arrangement to enable 1,2,3 and 4 digit dialling along with 4 digit-coded entry. There is also a trade’s facility by way of a dedicated button on the panel or via a four-digit code. Where there is a requirement for video entry, a camera may be panel mounted and the picture is either modulated onto a TV aerial for viewing on a normal television or directly linked to a monitor. A proximity reader may also be panel mounted for access control. These items operate independently to the TelGuard unit. |
 |
The TelGuard Junior range of telephone based entry systems has been designed to suit applications of between 1 and 1000 users. The system utilises a digital keypad button arrangement, which is backlit and incorporates coded entry. As with all TelGuard audio products there are only three connections required: A telephone exchange line socket or extension from a telephone system, a mains power socket for the low volt power supply and a multicore connection to the equipment to be controlled. This could be a gate, door lock, barrier or any other type of electrical entrance device.
|
Bespoke Range
The TelGuard Bespoke product is a range of telephone based entry systems that are individually tailored to the requirements of the customer. The Bespoke is designed to suit smaller projects of up to 9 houses/apartments/offices. As with all TelGuard audio products, there are only three connections required: An analogue telephone exchange line socket or analogue extension of a telephone system, a 230v 5A power source for the 12v power supply unit and a multicore connection to the equipment to be controlled.
|
The Bespoke is available with 1-9 stainless steel call buttons in addition to trade and assistance buttons. A backlit coded entry keypad is also available, operated by entering a 4-digit code. Where there is a requirement for video entry, a camera may be mounted in the call panel and the picture is either modulated onto a TV aerial for viewing on a normal television or directly linked to a monitor. A proximity reader may also be panel mounted for access control. These items operate independently to the TelGuard unit.
Keypads
ACT Keypads
Transmitters
Frontline Cloning Remote Transmitters
This miniature stylish remote will copy 433Mhz fixed code remotes with Dipswitches. The CLR2000 can assign up to 2 different channels to the 2 buttons. I.e. up to 2 garage door or gate receivers. The CLR4000 is the 4-button version. It has the same specifications as the CLR2000 but with 4 channels.
Post Boxes
Click here to view our services about Lettasafe boxes.
Please contact 01444 248292 and ask a member of our team about this service or click here to email us
|
