Manual Equipment

In addition to our Automated Gates, Bollards, Blockers and Vehicle Barriers, Frontline Automation offer a variety of manual products to further assist in creating a secure barrier. In addition to speed humps and flow plates, manual turnstiles and pedestrian gates, we have detailed below some of the more popular manual products:

Height Restrictors

FA5600 Height Restriction Barriers

The FA5600 height restrictor is available as a stand-alone item, or to be installed in conjunction with the FA5700 manual swing gate (see below).  The FA5600 is constructed from high quality steel rectangular box section and is used to prevent acccess to high vehicles. Clear signage allows the driver the opportunity to determine whether they have the clearance required to proceed under the Height Restrictor. There is the option to have the restrictor locked in either the open or closed position via an additional latch post and padlock respectively, which allows you the opportunity to allow access to higher vehicles as and when you determine it necessary.

Height Restrictor

 

 

 

 

 

Construction: Mild Steel Square Hollow Section.

Finish: Galvanised or Powder Coated. Standard Colours, additional RAL colours available on request.

Span: Available from 2.0m - 6.0m or as a double barrier up to 12.0m

Installation: Posts may be sunken or surface mounted

Construction: STANDARD: Posts = 150x150x5mm & Crossbeam = 60x60x3mm. HD: Posts = 150x150x5mm & Crossbeam = 80x80x5mm

Fittings: Provided complete with warning/height signs & padlocks.

Manual Swing Gate

FA5700 Manual Swinging Gate

As detailed above, the FA5700 can be installed alongside the FA5600 or indeed as it's own entity. It is an ideal and relatively low cost solution to a number of parking, road access and traffic control situations and is particuarly useful where automated gates are not required/necessary.

The FA5700 can be provided as a standard or heavy duty version, and as either a single or double leaf. The gate(s) can be locked either open or closed via an additional latch post and padlock.

FA5700 Manual Swinging Gate

 

 

 

 

 

Construction: Mild Steel Squared Hollow Section

Finish: Galvanised or Powder Coated as Standard

Span: Available from 2.0m - 6.0m or as a double barrier up to 12.0m

Installation: Posts may be either sunken or surface mounted

Construction: STANDARD: Posts = 100x100x4mm & Gates = 60x60x3mm. HD: Posts = 150x150x5mm & Gates = 80x80x5mm

Fittings: Provided complete with warning/height signs & padlocks.

Below is pictured a single height restrictor and manual swing gate combination:

 single height restrictor and manual swing gate combination

 

 

 

 




Manual Barriers

The FA5000 Manual Barrier range comes in two options, standard (S) and HD. Both can be supplied and installed by Frontline Automation, or dispatched on a supply only basis directly to site.

The design of the FA5000S & FA5000HD incorporates a locking system, allowing the barrier to be locked in the lower or raised position prior to fitting the padlock. They both have a counterbalanced fish tail weight for ease of operation. The FA5000HD comes in a dual barrier option which is available with a central locking system to suit wider roadways.

Both have an aluminium arm, standard colours are red/white or yellow/black but other colours are available on request. Both standard and heavy duty versions are available with Bottom Skirting, Stop/No Entry Signs and Pogo Tip Support as optional extras.

FA5000S

The FA5000S is a low maintenance and cost effective way to control access to unauthorised areas.

FA5000S

 

 

 

 

 

Specification: Counterbalanced Manual Raise Arm Vehicle Barrier

Maximum Boom Length: 7 Metres

Boom Diameter: 76mm

Baseplate Dimensions: 300 x 300mm

Finish: Polyester Powder Coated

The FA5000S is supplied complete with Lockable End Rest, Padlock, M12 Anchor Shield Bolts and Lifting Handle.

FA5000HD

The FA5000HD has a pivot assembly made of steel box section which pivots on two heavy duty stainless steel bearing blocks.

FA5000HD

Specification: Counterbalanced HD Manual Raise Arm Barrier

Maximum Boom Length: 9 Metres

Boom Diameter: 100mm

Baseplate Dimensions: 450mm x 450mm

Finish: Galvanised & Polyester Powdercoated

The FA5000HD is supplied complete with Lockable End Rest, Padlock, M16 Anchor Shield Bolts and Lifting Handle

“Contact us” for a no-obligation site survey.